-
Translucent Silicone Bulb Seal
$19.99Translucent Silicone Bulb Seal can be used on inswing or outswing doors to close gaps from 1/16 to 3/16 inch (1.6 to 4.7 millimeter). Adhere flat base to glass edge or wall using Silicone Sealant.
Learn More -
Multi-Purpose H Wipe
$19.99Versatile Multi-Purpose "H" Wipe has two rigid legs and two soft legs. It can be used as a bottom sweep, or as a seal if run vertically up the edge of the door. One or both soft legs can be trimmed to accommodate many installation options. Installs easily by simply pressing on to edge of glass.
Learn More
-For 3/8 inch thick glass
-Can be Used as a Bottom Sweep or as Seal
-98" (248.9 cm) Stock Length -
Polycarbonate Strike for 90º Jamb with 3/8 Glass
$24.99Clear Polycarbonate Strike for 90º Degree Jamb is snapped onto the strike side fixed panel at a 90º degree angle from the door. Contains vinyl insert.
Learn More
-Snaps Onto Fixed Panel
-For Glass to Glass Applications
-98 Inch (248.9 cm) Stock Len -
Polycarbonate 135º Strike Jamb for 3/8 Glass
$26.99Clear Polycarbonate Strike Jamb is snapped onto the fixed mitered strike panel when using hinges in 135º Degree neo-angle installations. Contains vinyl insert.
Learn More
-Popular Neo-Angle Strike Jamb for Mitered Fixed Panel
-Snaps Onto Fixed Panel or Door
-Vinyl Insert Included
-For Glass to Glass Applications
-98" (2.49 m) Stock Lengths
-Due to size shipping is extra -
Y Inline Panel Seal for 180 deg
$19.99This "Y" Inline Panel Seal is for use on 180 Degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side. The "U" portion PVC is rigid with single leg made of soft vinyl.
Learn More
- Snaps Onto Fixed Panel
- For Glass to Glass Applications
- 98" (248.9 cm) Stock Length
- Due to size shipping is extra -
Traditional 180° Glass Clamp
$25.99aditional 180° Glass Clamps are ideal for fixed transom or inline panel installations in frameless shower enclosures. Panels can be notched to fit around the screw stud. Below are additional finishes to choose from.
Learn More
Color: Brass
Material: Solid Brass
Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
Fabrication Required: Stud Will Fit Between Panels With .394 Inch (9.9 millimeter) Gap, or you can Notch the Glass for a Tighter Gap
Includes: Gaskets
Note: An Additional Set of Gaskets is Required for 5/16 Inch (7.9 millimeter) Glass -
Traditional Standard 90° Glass Clamp
$27.99The Traditional Standard 90° Glass Clamps are a truly versatile clamp that have two uses: as a 90° Clamp for vertical fixed panels in glass shower enclosures; as a bracket for horizontal glass shelves within the enclosure. Clamp design allows for flush mounting of shelf to wall, or for adjoining panels to meet with a minimal gap.
Learn More
• Material: Solid Brass or Stainless Steel
• Glass Thickness Range: 5/16 to 3/8 Inch (8 to 10 millimeter)
• Includes: Gaskets and Wood Screw to be Used for Optional Wall Mounting Application
• An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass -
90º Sleeve Over Glass Clamp
$23.99This Sleeve Over Glass Clamp is designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. Can also be used to secure the glass panels in position while the applied silicone in the joint cures.
Learn More
For 5/16" to 1/2" Thick Glass
Solid Brass
Finish: Brass -
Traditional Oversized Fixed Panel U-Clamp
$23.99This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps. They are especially recommended for 1/2 inch (12.7 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 inches (38.1 millimeters) times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).
Learn More
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 to 3/4 Inch (15.9 to 19.1 millimeter)
• Includes: Mounting Screw and Gaskets
• Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass -
Traditional 135° Glass Clamp
$27.99These 135° Glass Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135°. Below are additional finishes to choose from.
Learn More
• Color: Brass
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Each Panel
• Includes: Gaskets