The Traditional Standard 90° Glass Clamps are a truly versatile clamp that have two uses: as a 90° Clamp for vertical fixed panels in glass shower enclosures; as a bracket for horizontal glass shelves within the enclosure. Clamp design allows for flush mounting of shelf to wall, or for adjoining panels to meet with a minimal gap.

• Material: Solid Brass or Stainless Steel
• Glass Thickness Range: 5/16 to 3/8 Inch (8 to 10 millimeter)
• Includes: Gaskets and Wood Screw to be Used for Optional Wall Mounting Application
• An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

This Sleeve Over Glass Clamp is designed to provide a mechanical fastener to cover the shear forces placed on the glass panels. Can also be used to secure the glass panels in position while the applied silicone in the joint cures.

For 5/16" to 1/2" Thick Glass
Solid Brass
Finish: Brass

This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps. They are especially recommended for 1/2 inch (12.7 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 inches (38.1 millimeters) times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).

• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 to 3/4 Inch (15.9 to 19.1 millimeter)
• Includes: Mounting Screw and Gaskets
• Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

These 135° Glass Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135°. Below are additional finishes to choose from.

• Color: Brass
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Each Panel
• Includes: Gaskets

This Fixed Panel U-Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clearance between the glass and wall is from 5/32 to 3/16 inch (4.0 to 4.8 millimeter). Clear silicone can be used to seal the gap and provide a clean, water-tight appearance. Other finishes available below.

• Color: Brass
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 3/8 Inch (8 to 10 millimeter)
• Hole Diameter Required: 5/8 to 3/4 Inch (15.9 to 19.1 millimeter)
• Includes: Mounting Screw and Gaskets
• Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

Movable Wall Mounted Transom Clamps can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure. Includes mounting screws and gaskets.

For 5/16" to 1/2" (10mm to 12mm) Thick Glass
Wall Mounted
Solid Brass Material
Finish: Brass

This "Y" Inline Panel Seal is for use on 180 Degree inline glass-to-glass applications. Snap onto the fixed panel with the lip on the strike side. The "U" portion PVC is rigid with single leg made of soft vinyl.

- Snaps Onto Fixed Panel
- For Glass to Glass Applications
- 98" (248.9 cm) Stock Length
- Due to size shipping is extra

Translucent "T" shaped Edge Wipe can be used on inswing or outswing doors. Closes gaps up to 7/16 inch (11 millimeter) and can be trimmed for smaller gaps. Adhere 5/16 inch (8 millimeter) rigid base to either glass edge or wall using our Clear Very Hi-Bond Tape.

Clear 180 degree Polycarbonate Strike and Door Jamb is snapped onto the fixed panel running inline with the door. Contains vinyl insert.

-For 3/8 inch glass
-Snaps Onto Fixed Panel or Door
-For Glass to Glass Applications
-98" (248.9 cm) Stock Length
-Due to size shipping is extra