This Fixed Panel U-Clamp mounts directly to the wall, ceiling or floor to secure vertical fixed glass panels. Clearance between the glass and wall is from 5/32 to 3/16 inch (4.0 to 4.8 millimeter). Clear silicone can be used to seal the gap and provide a clean, water-tight appearance. Other finishes available below.

• Color: Brass
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 3/8 Inch (8 to 10 millimeter)
• Hole Diameter Required: 5/8 to 3/4 Inch (15.9 to 19.1 millimeter)
• Includes: Mounting Screw and Gaskets
• Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

These 135° Movable Transom Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135°.

Available in Several Attractive Finishes
Constructed of Solid Brass
For Glass Thicknesses of 5/16" to 1/2"
Finish: Brass

This Movable Glass-to-Glass Transom Clamp can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure. Includes mounting screws and gaskets.

For 5/16" to 1/2" Thick Glass
Glass-to-Glass Application
Solid Brass Material
Finish: Brass

Movable Wall Mounted Transom Clamps can be used to pivot transom panels above the shower door. Wall Mount and Glass-to-Glass Clamps can be used in any combination, depending upon the configuration of the enclosure. Includes mounting screws and gaskets.

For 5/16" to 1/2" (10mm to 12mm) Thick Glass
Wall Mounted
Solid Brass Material
Finish: Brass

aditional 180° Glass Clamps are ideal for fixed transom or inline panel installations in frameless shower enclosures. Panels can be notched to fit around the screw stud. Below are additional finishes to choose from.

Color: Brass
Material: Solid Brass
Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
Fabrication Required: Stud Will Fit Between Panels With .394 Inch (9.9 millimeter) Gap, or you can Notch the Glass for a Tighter Gap
Includes: Gaskets

Note: An Additional Set of Gaskets is Required for 5/16 Inch (7.9 millimeter) Glass

These 135° Glass Clamps have attractive mitered edges, and will match hinges offering a similar design. Used to connect two fixed glass panels meeting at 135°. Below are additional finishes to choose from.

• Color: Brass
• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 or 3/4 Inch (16 or 19 millimeter) Each Panel
• Includes: Gaskets

The Oversized 90° Glass Clamps are especially suggested for use in 1/2 inch (12.7 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 times the glass thickness is required by the Temperer (from the edge of the glass to the closet edge of the hole. Below are additional finishes to choose from.

• Color: Brass
• Material: Solid Brass or Stainless Steel
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Includes: Gaskets and Wood Screw to be Used for Optional Wall Mounting Application
• An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

The Traditional Standard 90° Glass Clamps are a truly versatile clamp that have two uses: as a 90° Clamp for vertical fixed panels in glass shower enclosures; as a bracket for horizontal glass shelves within the enclosure. Clamp design allows for flush mounting of shelf to wall, or for adjoining panels to meet with a minimal gap.

• Material: Solid Brass or Stainless Steel
• Glass Thickness Range: 5/16 to 3/8 Inch (8 to 10 millimeter)
• Includes: Gaskets and Wood Screw to be Used for Optional Wall Mounting Application
• An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass

This Oversized Fixed Panel U-Clamp performs the same function as our Standard Fixed Panel U-Clamps. They are especially recommended for 1/2 inch (12.7 millimeter) thick glass installations where a hole drilling measurement of 1-1/2 inches (38.1 millimeters) times the glass thickness is required by the Temperer (from the edge of the glass to the closest edge of the hole).

• Material: Solid Brass
• Glass Thickness Range: 5/16 to 1/2 Inch (8 to 12 millimeter)
• Hole Diameter Required: 5/8 to 3/4 Inch (15.9 to 19.1 millimeter)
• Includes: Mounting Screw and Gaskets
• Note: An Additional Set of Gaskets is Required for 5/16 Inch (8 millimeter) Glass