0 item(s) - $0.00
U-channels, Jambs, door sweeps you name it you can find it here.

   

Set Descending Direction
per page
  1. Through-Glass Mounted Support Bar

    Through-Glass Mounted Support Bar

    $83.99

    This Through-Glass Mounted Support Bar creates a means of support that strengthens an enclosure’s structural integrity. It eliminates the use of a header, and can be mounted to a wall or to the ceiling. The versatile design allows for mounting glass-to-wall, and glass-to-ceiling. Requires a 5/8 inch (16 millimeter) hole in glass, and comes in finishes to match our Hinges and Pull Handles. All mounting hardware included.

    -Components for the Fabrication of Custom Support Bars to Meet Your Exact Needs
    -39" Bar Length, 42-5/8" Overall Length
    -Finish: Brass

    Important Note:
    For use on Glass-to-Glass installations special fittings are required.

    Learn More
  2. Wall-To-Glass Support Bar for 3/8 to 1/2 inch Thick Glass

    Wall-To-Glass Support Bar for 3/8 to 1/2 inch Thick Glass

    $71.99

    The Fixed Panel Support Bar will stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling. The Wall-To-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed panel. The Glass-To-Glass Bar has a solid brass end cap with a swiveling U-shaped receptacle on both sides to secure each fixed panel. Nylon-tipped set screws secure the glass and prevent glass-to-metal contact. No holes or cut-outs required. Stock Bars are 39 inches (975 millimeters) in length. Simply cut to size required.

    -Provides Fixed Panel Support for Enclosures Not Reaching the Ceiling
    -No Hole Drilling Required
    -Finish: Brass

    Learn More
  3. Glass-To-Glass Support Bar for 3/8 to 1/2 inch Thick Glass

    Glass-To-Glass Support Bar for 3/8 to 1/2 inch Thick Glass

    $80.99

    The Fixed Panel Support Bar will stabilize fixed panels of glass in enclosures that do not go all the way up to the ceiling. The Wall-To-Glass Bar has a bell-shaped clamping device on the wall side, and a solid brass end cap with a swiveling U-shaped receptacle to secure the fixed panel. The Glass-To-Glass Bar has a solid brass end cap with a swiveling U-shaped receptacle on both sides to secure each fixed panel. Nylon-tipped set screws secure the glass and prevent glass-to-metal contact. No holes or cut-outs required. Stock Bars are 39 inches (975 millimeters) in length. Simply cut to size required.

    -Provides Fixed Panel Support for Enclosures Not Reaching the Ceiling
    -No Hole Driling Required

    Specifications:

    Material: 3/4 inch (19 millimeter) Diameter Tubular Brass Bar, Solid Brass End Caps
    Glass Thickness Range: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass
    Bar Length: 39 inches (975 millimeters)
    Includes: All Required Mounting Hardware

    Learn More

   

Set Descending Direction
per page