Pinnacle Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Pinnacle Adjustable Series has taken our popular Pinnacle Series to a new level. Adjustment to accommodate the angle desired (up to 90°) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0°. The door can swing 90° inward and also 90° outward (adjusting angle from factory set position will reduce 90° swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5° inside the shower area, thus having the door close snugly against the jamb.

- Brass Finish
- Adjustable to Any Angle Up To 90° Without Removing Door
- Available in Several Beautiful Finishes

The Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. More finishes avalable below.

• Finish: Brass
• Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass
• Special Feature: Hinge plates are 25% thicker than competitive hinges, thereby reducing deflection and providing greater holding power
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out(except PET181 and PET182)
• Closing Type: Precise Close to 0°
• Cut-Out Required

Maximum Door Capacities:
Using 2 Hinges – Glass up to 31” (787mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide

The Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. More finishes to choose from below.

• Finish: Brass
• Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass
• Special Feature: Hinge plates are 25% thicker than competitive hinges, thereby reducing deflection and providing greater holding power
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out(except PET181 and PET182)
• Closing Type: Precise Close to 0°
• Cut-Out Required

Maximum Door Capacities:
Using 2 Hinges – Glass up to 31” (787mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide

The Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. More finishes to choose from below.

• Finish: Brass
• Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass
• Special Feature: Hinge plates are 25% thicker than competitive hinges, thereby reducing deflection and providing greater holding power
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out(except PET181 and PET182)
• Closing Type: Precise Close to 0°
• Cut-Out Required

Maximum Door Capacities:
Using 2 Hinges – Glass up to 31” (787mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide

The Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. More finishes to choose from below.

• Finish: Brass
• Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass
• Special Feature: Hinge plates are 25% thicker than competitive hinges, thereby reducing deflection and providing greater holding power
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out(except PET181 and PET182)
• Closing Type: Precise Close to 0°
• Cut-Out Required

Maximum Door Capacities:
Using 2 Hinges – Glass up to 31” (787mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide

The Petite Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Petite Series provides a complete spectrum of hinges for frameless shower doors using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Developed to allow virtually every application configuration, Petite Series Hinges deliver design freedom. More finishes avalable below.

• Finish: Brass
• Glass Thickness: 1/4 to 5/16 inch (6 to 8 millimeter) Tempered Safety Glass
• Special Feature: Hinge plates are 25% thicker than competitive hinges, thereby reducing deflection and providing greater holding power
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out(except PET181 and PET182)
• Closing Type: Precise Close to 0°
• Cut-Out Required

Maximum Door Capacities:
Using 2 Hinges – Glass up to 31” (787mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide

Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

-Finish Brass
-Precise Closing Feature to Zero Degrees
-Available in Several Beautiful Finishes

Monaco Series introduces charm, richness and character to the choice of frameless shower door hinges using 1/4 to 5/16 inch (6 to 8 millimeter) safety glass. Available in two wall mount and four glass-to-glass styles, Monaco Hinges present numerous design and configuration options. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Two distinct models stand out in the Monaco Series: the M0N044 model is a Flush Back Plate Wall Mount Hinge that provides a clean exterior sight line because the mounting plate is visible only from the inside of the shower; the MON181 Glass-to-Glass Hinge is used to mount a door to a fixed panel of glass in a 180 degree plane, and allows the door to swing out 180 degree and fold back on itself. Several standard finishes are stocked.

-Finish Brass
-Precise Closing Feature to Zero Degrees
-Available in Several Beautiful Finishes

Monaco 045 Series of professional hinges is able to accommodate 1/4 to 5/16 inch (6 to 8 millimeter) tempered safety glass. The Monaco 045 Series is designed to be able to mount a door on a wall that runs at a 45 degree inside plane. A variety of three styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. Aesthetically pleasing beveled edges and corners give Monaco Hinges the look many architects and designers desire. Several standard finishes are stocked.

- Finish Chrome
- Used to Wall Mount on a 45 Degree Inside Plane