Stainless Steel Replacement Screws for Shower Door Hinges are available for all of CRL's Shower Door Hinges. Conveniently packaged, these screws should be ordered and kept in inventory for those emergency situations where an immediate response is required.

-Finish Chrome

Hinge Clamping Plate Screws are available in all finishes for all of Shower Door Hinges. Conveniently packaged, these screws should be ordered and kept in inventory for those emergency situations where an immediate response is required.

-Finish Chrome
-Stainless Steel Replacement Screws
-Produced and Conveniently Packaged to Match All Available Finishes

Hinge Pin Wrench for Shower Doors is designed to simplify the process of reversing 5 Degree Pivot Pins in Geneva, Pinnacle, Elite, Ultimate and Cathedral Series Hinges. The Pivot Pin can be rotated 180 degrees to activate the opposite side.

-Saves Time When Changing Pivot Pin Angle
-Works With the Following Hinge Series: Geneva, Pinnacle, Elite, Ultimate, Cathedral, and Roman

The Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. More finishes below.

• Finish: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter)
• Tempered Safety Glass
• Construction: Solid Brass
• Fabrication Requirements: Optional Square or "Mouse Ears" Cut-out

Maximum Door Capacities:
Using 2 Hinges – Glass up to 36” (914mm) Wide
Using 3 Hinges – Glass up to 36” (914mm) Wide

The Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. More finishes below.

• Finish: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter)
• Tempered Safety Glass
• Construction: Solid Brass
• Fabrication Requirements: Optional Square or "Mouse Ears" Cut-out

Maximum Door Capacities:
Using 2 Hinges – Glass up to 36” (914mm) Wide
Using 3 Hinges – Glass up to 36” (914mm) Wide

The Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. More finishes below.

• Finish: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter)
• Tempered Safety Glass
• Construction: Solid Brass
• Fabrication Requirements: Optional Square or "Mouse Ears" Cut-out

Maximum Door Capacities:
Using 2 Hinges – Glass up to 36” (914mm) Wide
Using 3 Hinges – Glass up to 36” (914mm) Wide

The Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs. More finishes to choose from below.

• Finish: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter)
• Tempered Safety Glass
• Construction: Solid Brass
• Fabrication Requirements: Optional Square or "Mouse Ears" Cut-out

Maximum Door Capacities:
Using 2 Hinges – Glass up to 36” (914mm) Wide
Using 3 Hinges – Glass up to 36” (914mm) Wide

The Vienna Series of professional hinges is designed to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Available in both Wall Mount and Glass-to-Glass styles, it provides design flexibility. Vienna Series Hinges are constructed of solid brass with all moving parts (pins and springs) in stainless steel. Two strategically placed pins inside the hinge provide template options, and satisfy two schools of thought for mounting shower door hinges. It allows the Vienna Hinge to be used with it's own "mouse-ears" cut-out, or in some cases fit competitive "mouse-ear" cut-outs. On the other hand, to enable increased adjustability, the two pins can be removed which allows the Vienna Hinge to fit it's own rectangular shape, square cornered cut-out, or in some cases, fit competitive rectangular shaped, square cornered cut-outs.More finishes below.

• Finish: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter)
• Tempered Safety Glass
• Construction: Solid Brass
• Fabrication Requirements: Optional Square or "Mouse Ears" Cut-out

Maximum Door Capacities:
Using 2 Hinges – Glass up to 36” (914mm) Wide
Using 3 Hinges – Glass up to 36” (914mm) Wide

Rondo Series of professional hinges is able to accommodate 5/16 to 3/8 inch (8 to 10 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Rondo Hinges are self-centering, with four springs for maximum retention strength. Optional 5 Degree Pivot Pin Sets are available to accommodate "off angle" installations. Some advantages of pivot type hinges include the fact that they carry the majority of the weight on the bottom, and have the ability to be inset from the wall, enabling clearance for towel bars and other projections. The Rondo Series is adaptable to CRL's Deluxe Header System for shower enclosures not extending to full ceiling height.

- Finish Brass
- Self-Centering with Optional 5 Degree Pivot Pin Set