-
Estate Series 180° Glass-to-Glass Hinges
$74.99The Estate Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of four styles, including Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. These beautifully finished, solid brass forged Estate Hinges make it possible to mount 3/8 to 1/2 inch (10 to 12 millimeter) thick shower doors without surrounding frames, so the door has an almost "floating" appearance. The Estates heavy-duty stainless steel springs allow the door to swing 90° in and 90° out. A friction cam allows the door to be firmly maintained in any position, except when within 15° of the closed position, where it is tapered to assist in centering the door. Below are additional finishes to choose from.
Learn More
• Color: Brass
• Glass Thickness: 3/8 to 1/2 inch (10 to 12 millimeter) Tempered Safety Glass
• Construction: Solid Brass
• Hinge Swings: 90° in and 90° out
• Closing Type: Self-Centering when within 15º of closed position
• Cut-Out Required
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 34” (864mm) Wide -
Geneva Series Wall Mount Full Back Hinges
$37.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide -
Geneva Series Wall Mount Offset Back Hinges
$37.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide
Finish: Brass -
Geneva Series Wall Mount Short Back Hinges
$37.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide -
Geneva Series 180º Glass-To-Glass Hinges
$52.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide -
Geneva Series 135° Glass-to-Glass Hinges
$68.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide -
Geneva Series 90° Glass-To-Glass Hinges
$67.99The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.
Learn More
Use of Gaskets:
For 3/8” (10mm) Glass: Use one thick gasket on each side.
For ½” (12mm) Glass: Use one thin gasket on each side.
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide -
Cathedral Series Wall Mount Offset Back Plate Hinge
$107.99Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of four styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations.
Learn More
-Finish Brass
-Unique Two-Tone Design
-Available in Several Beautiful Finishes -
Cathedral Series 135° Glass-to-Glass Hinge
$207.99Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of four styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations.
Learn More
-Finish Brass
-Unique Two-Tone Design
-Available in Many Beautiful Finishes -
Cathedral Series 90° Glass-to-Glass Hinge
$178.99Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of 4 styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations.
Learn More
-Finish Brass
-Unique Two-Tone Design
-Available in Several Beautiful Finishes