Cathedral Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) thick tempered safety glass. A variety of 4 styles, Wall Mount and Glass-to-Glass types, gives design flexibility. The Cathedral Series Hinge combines a unique two-tone accent design with a positive hold cut-out and through-stud system. The Cathedral Series offers the same internal mechanism as our popular Geneva Series and contains a Reversible Pivot Pin for optional 5 degree offset door closure. A Custom Pivot Pin is available for "off-angle" installations.

-Finish Brass
-Unique Two-Tone Design
-Available in Several Beautiful Finishes

The CRL Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90°) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0°. The door can swing 90° inward and also 90° outward (adjusting angle from factory set position will reduce 90° swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5° inside the shower area, thus having the door close snugly against the jamb.

- Brass Finish
- Adjustable to Any Angle Up To 90° Without Removing Door
- Available in Several Beautiful Finishes

The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90°) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0°. The door can swing 90° inward and also 90° outward (adjusting angle from factory set position will reduce 90° swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5° inside the shower area, thus having the door close snugly against the jamb.

- Brass finish
- Adjustable to Any Angle Up To 90° Without Removing Door
- Available in Several Beautiful Finishes

The Geneva Adjustable Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) tempered safety glass. A variety of two styles, Wall Mount and Glass-to-Glass types, gives design flexibility and allows the designer/installer to create custom enclosures limited only by their imagination. The Geneva Adjustable Series has taken our popular Geneva Series to a new level. Adjustment to accommodate the angle desired (up to 90°) is done after the door is installed. Once the door is hung, simply loosen the allen screws and turn the door to the desired closed position. By merely tightening the allen screws, your door will close precisely to 0°. The door can swing 90° inward and also 90° outward (adjusting angle from factory set position will reduce 90° swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5° inside the shower area, thus having the door close snugly against the jamb.

- Brass Finish
- Adjustable to Any Angle Up To 90° Without Removing Door
- Available in Several Beautiful Finishes

The Junior Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below are additinal finishes to choose from.

Use of Gaskets:
For 1/4” (6mm) Glass: Use one thick gasket on each side.
For 5/16” (8mm) Glass: Use one thin gasket on each side.

• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 1/4” (6mm) to 5/16” (8mm) thick tempered glass
• Cutouts Required
• Three Year Warranty
• Brass Finish

Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide

The Junior Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.

Use of Gaskets:
For 1/4” (6mm) Glass: Use one thick gasket on each side.
For 5/16” (8mm) Glass: Use one thin gasket on each side.

• Color: Brass
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 1/4” (6mm) to 5/16” (8mm) thick tempered glass
• Cutouts Required
• Three Year Warranty

Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide

The Junior Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below are additional finishes to choose from.

Use of Gaskets:
For 1/4” (6mm) Glass: Use one thick gasket on each side.
For 5/16” (8mm) Glass: Use one thin gasket on each side.

• Color: Brass
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 1/4” (6mm) to 5/16” (8mm) thick tempered glass
• Cutouts Required
• Three Year Warranty

Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide

The Junior Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below are additional finishes to choose from.

Use of Gaskets:
For 1/4” (6mm) Glass: Use one thick gasket on each side.
For 5/16” (8mm) Glass: Use one thin gasket on each side.
• Color: Brass
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 1/4” (6mm) to 5/16” (8mm) thick tempered glass
• Cutouts Required
• Three Year Warranty

Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide

The Junior Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.

Use of Gaskets:
For 1/4” (6mm) Glass: Use one thick gasket on each side.
For 5/16” (8mm) Glass: Use one thin gasket on each side. Below are additional finishes to choose from.

• Color: Brass
• Self-Centering when within 15º with Reversible 5º Pivot Pin
• Hinges Swing 90º in and 90º out
• Can be used with 1/4” (6mm) to 5/16” (8mm) thick tempered glass
• Cutouts Required
• Three Year Warranty

Maximum Door Capacities:
Using 2 Hinges – Glass up to 28” (711mm) Wide
Using 3 Hinges – Glass up to 32” (813mm) Wide