0 item(s) - $0.00
The Geneva Series accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. With 6 Different Styles to choose from.

   

Set Descending Direction
per page
  1. Geneva Series Wall Mount Full Back Hinges

    Geneva Series Wall Mount Full Back Hinges

    $37.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Learn More
  2. Geneva Series Wall Mount Offset Back Hinges

    Geneva Series Wall Mount Offset Back Hinges

    $37.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Hinges Swing 90º in and 90º out
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Finish: Brass

    Learn More
  3. Geneva Series Wall Mount Short Back Hinges

    Geneva Series Wall Mount Short Back Hinges

    $37.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Hinges Swing 90º in and 90º out
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Learn More
  4. Geneva Series 180º Glass-To-Glass Hinges

    Geneva Series 180º Glass-To-Glass Hinges

    $52.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Hinges Swing 90º in and 90º out
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Learn More
  5. Geneva Series 135° Glass-to-Glass Hinges

    Geneva Series 135° Glass-to-Glass Hinges

    $68.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Hinges Swing 90º in and 90º out
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Learn More
  6. Geneva Series 90° Glass-To-Glass Hinges

    Geneva Series 90° Glass-To-Glass Hinges

    $67.99

    The Geneva Series of professional hinges is able to accommodate 3/8 to 1/2 inch (10 to 12 millimeter) glass. A variety of 11 styles, including Wall Mount and Glass-to-Glass types, gives design flexibility. They are made of solid brass with all moving parts (pins and springs) in stainless steel. Geneva Hinges are self-centering, and contain a Reversible 5º Pivot Pin. In addition, Custom Pivot Pins are available to accommodate "off angle" installations. Below we have additional finishes that you can choose from.

    Use of Gaskets:
    For 3/8” (10mm) Glass: Use one thick gasket on each side.
    For ½” (12mm) Glass: Use one thin gasket on each side.

    • Self-Centering when within 15º with Reversible 5º Pivot Pin
    • Hinges Swing 90º in and 90º out
    • Can be used with 3/8” (10mm) to ½” (12mm) thick tempered glass
    • Cutouts Required
    • Three Year Warranty

    Maximum Door Capacities:
    Using 2 Hinges – Glass up to 28” (711mm) Wide
    Using 3 Hinges – Glass up to 32” (813mm) Wide

    Learn More

   

Set Descending Direction
per page